46
!
IMPORTANT SAFETY INSTRUCTIONS
Basic precautions should always be followed, including the following safety
instructions when using the crosstrainer: Read all instructions before using this
equipment.
• Always keep hands and feet off the treadmill while others are using it.
• Never place hands or feet under the treadmill.
• Do not allow children on or around the treadmill.
• This computer with function of pulse detection is designed for users' reference when doing
exercise, it can not be used for medical purpose.
• Never operate the treadmill if it has been dropped or damaged, or exposed to water. Contact
your distributor for service recommendations.
• Before starting any exercise program, it is recommended that you consult your physician.
• Stop using this appliance if you feel dizziness or discomfort.
• Medical approval and close supervision is necessary when the appliance is used by or near
handicapped individuals.
• Use the treadmill only for its intended use as described in this manual.
• Do not pull the treadmill by the power cord or use it as a handle.
• Keep power cord away from heated surfaces and oven flame.
• Do not use or store outdoors.
• Do not operate where aerosol products are being used or where oxygen is being administered.
• While turning on the power, please stand beside the treadmill, not on the treadmill.
• Maximum user weight is 140 Kg (308 LBS).
• Do not operate in a wet or moist condition.
• Do not use the treadmill on a carpet that is greater than 1/2 inch in height.
• Do not operate under a blanket. Excessive heating can occur and cause fire, electrical shock, or
injury to persons.
• Never insert any object into any opening on the treadmill.
• Keep the treadmill on a solid, level surface with sides at least two feet from any wall. Be sure the
area around the treadmill remains clear during use and has adequate clearance, see illustration
below.
WARNING
:
To reduce the risk of electric shock, always unplug the treadmill from the electrical
outlet immediately after using and before cleaning, assembling, or servicing the tread
mill.
