902-289 6’ Spiral Slide
Page
13
Rev. 07/22/03
SportsPlay Equipment, Inc., 5642 Natural Bridge, St. Louis, MO 63120 (314) 389-4140
902-135: TEN RUNG WALL
KKJJJ
SPECIFICATIONS
PARTS LIST
Event:
Ten rung walls act as a
barrier to prevent falls from decks.
Horizontal pipes that fit into post
clamps are 1 3/8” O.D. Vertical
pipes are 1” O.D.
Paint:
shall be electrostatically
applied polyester dry powder coating
Hardware:
shall be a combination
of zinc-plated, stainless steel and
aluminum.
Ref Description QTY
A Wall 1
B Clamps 4
Hardware
MAINTENANCE:
•
Touch up any marred paint
surfaces.
•
Periodically check hardware for
integrity and tightness.
INSTRUCTIONS
:
- The ten rung wall is 48” wide and attached with (4) clamps.
- It is attached on the “deck side” of the deck posts with the top rail 38” minimum over the deck surface.
- Follow the step-by-step directions.
- If mounted outside the posts or off the deck surface there has to be a maximum of 3.5” between the
bottom of the wall, and the top of the deck.
- It is a good idea to put a couple of equal sized shims under the wall while installing.
- Level the wall.
- Review the clamp instructions for sideways attachment of clamp.
FOOTING DIAGRAM:
A
B
