January 29, 2019
5
511-146P ROPE CLIMB
INSTALLATION INSTRUCTION
INSTALLATION TIPS & TROUBLE SHOOTING
Apply locktite to all bolts during assembly prior to
completely tightening them.
Stainless Steel hardware can occasionally be difficult to use
particularly if you need to take them out to make an
adjustment. It is recommended that you add a drop of oil to
bolts that may have to be removed before you install them.
Do not tighten bolts all the way until the unit is completely
assembled and all components are square and level.
Identify and separate all parts by referencing the detail
drawings and the parts list.
As you unpack and separate the components use the
cardboard sheets that were used for packing and shipping to
prevent damage to the components. This is particularly true
for all Powder Coated and Thermoplastic coated
components, by setting the components on top of the
cardboard.
SPECIFICATIONS
Hardware – Stainless steel & tamper resistant
Attachment Bracket – Powder coated steel
SPECIAL SAFETY & ASTM COMPLIANCE NOTES
CRITICAL MEASUREMENT
IT IS EXTREMELY
IMPORTANT THAT YOU MAINTAIN A MAXIMUM OF 3 1/2”
DISTANCE BETWEEN THE TOP, BOTTOM, OR SIDES OF
THE PANEL.
