561-451 Combination Goal with Net Supports (Pair)
Page 2
Rev. 05/20/08
SportsPlay Equipment, Inc., 5642 Natural Bridge, St. Louis, MO 63120 (314) 389-4140
www.sportsplayinc.com
ASSEMBLY INSTRUCTIONS
NOTE:
All threaded ends of bolts protruding beyond nuts must be cut off
and/or peened to eliminate sharp edges. No more than two threads
should extend beyond face of nut.
All washers, “T” nuts, and other fastener hardware used on round
pipe or tubing must be hammered down to conform to the curved
underlying surface to eliminate catch points.
DO NOT tighten nuts more than hand-tight until entire assembly is
completed.
STEP #1:
Mark and dig footing holes
STEP #2:
Place 563-614 Uprights in Footing Holes.
Brace uprights so that the bottom does not rest on the footing
hole bottom. Make sure uprights are level. At least 2’0” of
upright should be in footing hole.
STEP #3:
Pour footings using:
12 – 80lb. Bags Pre-Mix Cement – 3 bags per hole.
Be sure to ‘cone’ the top of the pour for drainage.
STEP #4:
Attach 563-314 Frame using:
6 – 116-604 Hex Bolts
6 – 226-601 Lock Nuts
See Frame Attachment Detail A and B.
STEP #5:
Attach 563-215 Posts onto Frames using:
8 – 196-802 Socket Set Screws
