14
5. ASSEMBLE THE PRODUCT
STEP 1
Install the Main Frame
(1) Remove all packaging material and place the main frame on the carton
base.
(2) Lift the console mast into upright position, and then tighten the following
screws in sequence: screw (33) in (area D), screw (10) in (area A), and
screws (10) in (area B,C).
(3) Lift left/right swing arms and pedal arms as shown in the figure below,
and place the pedal carriages on the carton base.
(4) Carefully take out the glide rail (E) from the carton base while the swing
arms and pedal arms are lifted.
