47
MAINTENANCE
Error Messages
The following messages can appear on this product for diagnostic purposes.
ERROR 7 L, ERROR 7 R & ERROR 7 R/L
- Indication: the stride mecha-
nism is not calibrated properly. Contact a certified SportsArt technician. The
technician will need to either inspect the stride motor or the driver.
ERROR _8_1, ERROR _8_2
- Indication: There is a communication error
between control board and its driver. Contact a certified SportsArt techni-
cian. The technician will need to either inspect the stride motor or the driver.
Machine Model Unidentified
- The machine model couldn’t be identified.
MAINTENANCE
Lubrication
1. Enter the engineering mode screen, go to "UTILITY" page, see "Oiling
for Elliptical", press "START" button, then enter the lubrication procedure.
2. Once Lubrication procedure is activated, the stride motor will move to
the correct position. At this time, it is ready for lubrication.
3. When lubrication is completed, press <STOP> key to return the stride
length to 29”/730mm.
