background image

20

7. CONSIGNES DE SÉCURITÉ IMPORTANTES

Le produit SportsArt a été conçu et fabriqué afin d’assurer une sécurité optimale. 
Cependant certaines précautions s’appliquent chaque fois que vous utilisez votre produit. 

•  Lisez entièrement le manuel avant l’assemblage et l’utilisation. Veuillez aussi 

noter les consignes de sécurité suivantes:

•  Veuillez lire attentivement les instructions et installer le produit selon les 

instructions.

•  Assemblez et faites fonctionner le produit sur une surface solide et plane; NE 

PAS l’utiliser à l’extérieur ou près de l’eau.
•  En aucun cas, ne laissez des enfants à proximité ou sur le produit. 

• 

Vérifiez le tapis de course avant chaque utilisation. Assurez-vous que toutes les 

pièces sont assemblées et que tous les éléments de fixation sont serrés. NE PAS 

utiliser le produit si l’appareil est démonté de quelque façon.

•  Gardez vos mains loin des pièces mobiles.

•  Portez des vêtements d’entraînement appropriés; NE PORTEZ PAS de 

vêtements amples. NE PORTEZ PAS de chaussures à semelles en cuir ou à talons 

hauts. Attachez les cheveux longs.

•  Soyez prudent lors du montage et démontage de l’appareil.

• 

NE PAS utiliser d’accessoire non spécifiquement recommandé par le fabricant. 

Car cela pourraient provoquer des blessures ou entraîner une panne de l’appareil. 

•  Débranchez l’appareil de la prise avant l’entretien ou la suppression de toute 

pièce.

•  Une surveillance étroite est nécessaire quand de produit est utilisé par ou à 

proximité d’enfants, de malades ou de personnes handicapées.

•  Utilisez ce product uniquement pour l’usage prévu dans ce manuel.

•  La limite de poids de l’utilisateur pour le produit est de 227 kg, 500 lb. 

•  Ce produit n’est pas destiné à être utilisé par des personnes (y compris des 

enfants) dont les capacités physiques, sensorielles ou mentales sont réduites ou 

qui ne disposent pas de l’expérience ou du savoir nécessaires, sauf si celles-ci 

ont au préalable été formées eu égard à l’utilisation de produit par une personne 

responsable de leur sécurité.

• 

Les  enfants  doivent  être  encadrés  afin  d’empêcher  qu’ils  ne  jouent  avec  le 

produit.

•  Ce produit n’est pas destiné à être utilisé par des personnes (y compris des 

enfants) dont les capacités physiques, sensorielles ou mentales sont réduites ou 

qui ne disposent pas de l’expérience ou du savoir nécessaires, sauf si celles-ci ont 

au préalable été formées eu égard à l’utilisation de ce produit par une personne 

responsable de leur sécurité.

• 

Les  enfants  doivent  être  encadrés  afin  d’empêcher  qu’ils  ne  jouent  avec  le 

produit.

ATTENTION

Si vous ressentez une douleur ou si vous avez une sensation anormale, AR-
RÊTEZ VOTRE ENTRAÎNEMENT et consultez immédiatement votre médecin.  
Entraînez-vous à votre niveau d’exercice recommandé. NE PAS s’entraîner jusqu’à 
l’épuisement. Avant de commencer un programme d’exercice, vous devriez con-

sulter votre médecin. Il est recommandé de faire un examen physique complet. 
Dans ce manuel, les mots “gauche” et “droit” sont utilisés en référence aux pièces 
et au produit. Comme tels, les mots “gauche” et “droit” font respectivement ré-
férence aux côtés gauche et droit de l’exerciseur. De même pour plus de conci-
sion, le mot «vis» est utilisé dans certains cas où des rondelles, des vis et autres 
matériels sont associés. 

Summary of Contents for N961























Reviews: