4
2. SAfETy PRECAUTIONS (CONTINUED)
● Check all cables and harnesses before each use. Should you find any
signs of wear or defect in the cable or pulley assembly, immediately call
SportsArt service for repairs or service. Should you find any signs of defect
in the harness, contact the harness manufacturer.
● Ensure proper harness fit prior to and during use of the device. Please
refer to the harness manufacturer’s instructions to ensure that the harness
properly fits the patient.
●
Inproper grounding presents a shock hazard. If you have any ques-
tions, have a qualified electrician inspect the power supply outlet for proper
grounding.
●
Only use the compressor that comes with the product, do not replace the
compressor with any other compressors.
●
Never clean the compressor with liquids or solvents when cleaning. Dis-
connect the machine from the electricity supply by removing the plug and
use a damp cloth only
●
The compressor must be placed on a stable surface
●
The compressor is designed for air compression only and must never be
used for any other type of gas
●
Please do not attempt to modify the power cord. Adequate power supply
must be provided. If the plug does not match the outlet, have a qualified
electrician inspect and modify the power supply.
●
Before using this product, secure the safety straps in place. Hold the
handles and stand erect.
●
After exercising, please remove the power cord from the power outlet.
To avoid the risk of electrical shock, remove the power cord from the power
outlet before cleaning or performing maintenance work.
Warning
●
If you feel any pain or abnormal sensation, STOP YOUR WORKOUT
and consult your physician immediately. Work within your recommended
exercise level. DO NOT work to exhaustion. Before beginning any exercise
program, you should consult with your doctor. It is recommended that you
undergo a complete physical examination.
● Only qualified technicians are permitted to contact electrical components,
for instance, circuit boards. This product can carry an electrical charge even
when the product is not in use and the power cord has been removed from
the power source. After turning off the product, wait for five minutes before
disconnecting the power cord from the power outlet. Only after taking such
precautions should one remove the cover and contact components.
