3
2. SAfETy PRECAUTIONS
Safety was an important consideration in the design of the SportsArt Fitness ICARE
E872MU Body Weight Support System. However, during the use of the physical
rehabilitation elliptical trainer and the Body Weight Support System, you must pay
careful attention to safety.
●
For safety, operate this product only as instructed, and install only SportsArt parts
onto this product.
●
Assemble and operate the Body Weight Support System on a solid, level
surface; DO NOT use it outdoors or near water.
●
Check the Body Weight Support System before every use. Make sure all
parts are assembled, and all fasteners are tightened. DO NOT use the Body Weight
Support System if the unit is not fully assembled or if fasteners are loose or worn.
●
Wear proper workout clothing; DO NOT wear loose clothing. DO NOT wear
shoes with leather soles or high heels. Tie all long hair back. Do not go barefoot on
this product.
●
Please keep away from moving parts. Do not place hands on any moving or
operating parts. The product may not stop immediately if foreign objects block
moving parts.
●
Before turning off the power, please let this physical rehabilitation elliptical trainer
stop completely. Do not unplug the power cord during operation.
●
Do not rock this product. Please be careful in mounting and dismounting
the unit.
●
If this product is damaged in any way, stop operating it. If this product has
any issue or is broken, notify the SportsArt service department.
● DO NOT use accessories or parts that are not specifically recommended
by the manufacturer. Such parts might cause injuries or cause the unit to
fail.
●
Never drop or insert any object into any opening of the product.
●
Please operate this product in an area with good air circulation. Keep it
away from chemicals and flammable items. Keep it far from sprinklers and
damp areas.
●
All users must be supervised at all times while using this product.
●
Children should never be allowed to play on or near the product.
●
Maximum unloading weight for this product is 180 kg, 400 lb.
●
Before activating the Body Weight Support feature, use the adjustment
knob to set the lift to an appropriate weight. It is better to start at a low lifting
force and increase after activated.
●
This product requires an adequate dedicated power outlet and power
supply of 20A/110VAC (for 10A/220V). Keep the power cord free from hot
surfaces.
