Sports Play 901-801 EXPLORER, Installation Instruction, Page: 32 / 37

3/1/15 32
901-801 EXPLORER
INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION
ATTACHING PANELS
There is no required position for each specific panel but every opening above the
first deck should have one unless there is a slide or climber in that position.
Refer to drawings on pages 3-9 for panel positions if this is not clear.
1. First you must attach the panel clamp (H.02.04.047) and Flange
(h.02.04.083) to the required post by sliding the clamp over the flange
and putting it into position over the factory installed nuts on the posts.
2. Secure clamp and flange into position with a bolt (H.04.01.118). You
may tighten these bolts.
3. Each panel requires (4) of these clamps. Install the others following
steps 1 & 2 above.
4. Open clamps and insert panel before closing them again.
5. Secure panel to clamps by inserting a bolt (H.04.01.130) through the
clamp and panel and secure with a nut (H.04.07.016).
6. Repeat steps 1-5 on the remaining panels.