Sports Play 901-801 EXPLORER, Installation Instruction, Page: 28 / 37

3/1/15 28
901-801 EXPLORER
INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION
6. Position the dino climber onto the connection parts.
7. Ensure the climber is flush with the top of the platform
8. Mark the holes on the side of the platform, move the dino climber out of
the way and drill using a
½ ” bit.
9. Place the climber back into position (in the post connection parts and
flush with the platform) and ensure the holes are in alignment
10. Attach dino climber to platform by inserting a bolt (H.04.01.XX) through
a washer (H.04.06.008) through the climber and the platform. Slide an
open bolt cap (H.02.04.009), another washer and use a nut (H.04.07.018)
to secure it. (DO NOT TIGHTEN OR ATTACH BOLT COVER CAP
AT THIS TIME) Repeat for the rest of the holes
11. Attach Climber to connection pieces by first ensuring the climber is
positioned properly to the platform and the ground metal. Drill holes
through both connection parts and the climber.
12. Once the holes have been drilled you can attach the climber to the
connection metals by inserting a bolt (H.04.01.060)
through the metals
and climber then through a bolt cap (H.02.04.009), then a washer
(H.04.06.008) and secure with a nut (H.04.07.018).
Do not tighten nuts
or put the caps on the bolts at this time.
13. Secure aluminum cap to the tall post by inserting a bolt through the cap
and secure with a washer and a 2
nd
cap.
14. Once all the hardware has been assembled you may tighten and insert the
bolt cap covers.