TEAM BALL FEEDER
Sports Attack, LLC.
•
800-717-4251
•
sportsattack.com
7
Installing the ball tray assembly for the Team Feeder on the Hack Attack and e-Hack
Baseball and Softball Pitching Machines.
MATERIAL
1. Taking the bracket and the two (2) mounting bolts (See Figure 6), select the proper
alignment holes on the bracket for baseball or softball (See Figure 7).
IMPORTANT Make sure the bracket is attached with the rubber tube facing up (See
Figure 8 on page 8).
2. Using the ½ inch wrenches or ratchet, attach the bracket to the team feeder (See
Figure 8 below). The Team Feeder is now ready to attach to your pitching machine.
3. Line the team feeder up directly behind the pitching machine, leaving enough
space between the chute and the bracket to allow for the tray that will carry the
balls to the machine.
4. Attach the flexible stem socket (See Figure 2) to the flexible stem (See Figure 1),
being sure the flexible stem inserts fully into the flexible stem socket.
The ball tray assembly is now fully assembled and ready to use.
TEAM BALL FEEDER
BALL TRAY ASSEMBLY
INCLUDED MATERIALS
Qty Item
1 Bracket with Flexible Stem
2
5
/
16
” x 2
1
/
4
”Mounting Bolts
1 Tray
2
5
/
16
” USS Washer
1
5
/
16
” Nylon Lock Nut
TOOLS REQUIRED
Qty Item
2 ½” Wrenches or wrench
and socket-ratchet combo.
Team Ball F
eeder Ball T
ray Assembly
A
B
Figure 7
Alignment selection
Softball
Baseball
A
B
To order additional parts,
please contact:
Sports Attack
Customer Service Dept.
Ph
800.717.4251
Fx
775.345-2883
Figure 6
Attaching bracket.