Sports Attack TEAM FEEDER, Instruction Manual, Page: 6 / 12

TEAM BALL FEEDER
Sports Attack, LLC.
•
800-717-4251
•
sportsattack.com
4
TEAM BALL FEEDER ASSEMBLY
1. Bolt ball reservoir to main frame (Figure 1). Use washers against bottom of
main frame as shown in Figure 1 inset.
2. Place belt around main frame in preparation to also go around the barrel as
shown in Figure 2.
CAUTION
PERSONAL INJURY
HAZARD
Use of the softball feeder on
a machine set up for baseball
could result in equipment
damage and/or personal
injury.
NOTE: The Team Feeder is
supplied with one (1) ball
feed chute.
Team Ball F
eeder Assembly
Figure 1 Bolt ball Reservoir to main frame, using washers
and bolt.
Figure 2 Place belt around main frame as shown for easier assembly to tumbler.
Bolt and washers on the
bottom screw up into
PIM Nut