ACE ATTACk
™
TENNIS MAChINE
Sports Attack, LLC.
•
800-717-4251
•
www.sportsattack.com
6
Ac
e Att
ack™ As
sembl
y
ASSEMBLY
NOTE:
We recommend that two people complete the Assembly instructions. Because
of that, the instructions are written for two people to complete.
1. Unbolt machine from the pallet. two people should stand on opposite sides of
the Ace Attack from each other and carefully move the machine off the pallet.
2. tip machine to one side so that one person can prop/hold it up while the
second person installs two casters with the tool provided (see Figure 3, Page
4). then lean machine in the opposite direction so that the remaining two
casters can be installed. Be sure to fasten all four (4) casters securely using
the wrench provided (see Figure 3, Page 4).
3. Place the ball bin into position on the top of the throwing head at “A” (Figure
4). Install the
three (3) bolts as shown in Figure 4. tighten bolts securely.
NOTE:
there is one 2” bolt and two 2
1
/
4
” bolts.
NOTE:
tighten casters securely using the wrench provided (see Figure 3).
CAUTION
PERSONAL INJURY
hAZARD
Failure to use the special tool
provided to install the casters
could result in personal injury.
EQUIPMENT DAMAGE
Failure to use the special tool
provided to install the casters
could result in equipment
damage.
EQUIPMENT
ELECTRICAL
DAMAGE
DO NOt plug in or energize the
equipment until all Assembly
and Operation Instructions are
read and followed.
2” Bolt
with Washer
2
1
/
4
” Bolt
with Washer