background image

7. ACCESS TEST

7

With keys in hand, close and lock the door. 

PLACE AND HOLD

 the 

PROGRAMMED 

finger 

pad on scanner, indcator ring will flash white 

1 time and beep 1 time to alert scanner is 

activated.

If fingerprint is accepted,

 indicator ring will 

illuminate green. You now have access to your 

safe.

If fingerprint is rejected

, the indicator Ring 

will flash red 5 times and beep 5 times. 

GREEN LED = SUCCESS!

*Now that your fingerprint is successfully programmed, re-install the magnetic branding

badge and store your backup keys in a secure secondary location outside of the safe.

8. PROGRAMMING ADDITIONAL FINGERPRINTS

INDIVIDUALLY MAPPING ALL
ZONES OF YOUR FINGERPRINT
WILL ENSURE A RELIABLE
READING BY THE SCANNER.

To ensure each programming 

sequence is properly captured, the 

scanner needs to read the exact 

same place on your finger four 

times in a row. 

This counts as one programmed 

fingerprint of the 100 fingerprints 

this unit can keep in memory.

Once programming sequence has 

been successfully completed you 

can move onto the next zone of 

your fingerprint. 

TIP

RIGHT

TOP

MIDDLE

LEFT

When accessing your safe quickly, there is a chance you might press 

the scanner with a part of your finger that you have not registered before. 

For this reason, we recommend programming additional areas of your 

fingerprint to ensure fast and reliable entry to your safe.

Summary of Contents for HAVEN SA5925HX-BIO

















Reviews: