30
31
ENGLISH
4. COMPONENTS LIST
No. Description
Quantity
11 Shaft washer
2
12 Bolt
6
13 Plastic cover-back
1
14 Upper computer cable
1
15 Plastic cover-Front
1
16 Foam padding for fixed handlebar
2
17 End cap for fixed handlebar
2
18 Pulse sensor
2
19 Fixed handlebar
1
20 Bolt
3
21 Bolt
4
22 Axle
1
23 End cap for Upper Handlebar
2
24 Swiveling rod (L)
2
25 Swiveling rod (R)
2
26 Allen head screw
8
27 Spring washer
2
sets
28 Bearing
4
29 Handlebar post
1
30L Front end cap (L)
1
30R Front end cap (R)
1
31 Bolt
10
32 Allen head screw
4
33 Flat washer
6
34 Front Stabilizer
1
35 Front plastic cover
1
36 Tension cable
1
37L Plastic cover for footplate support
bar (L)
2
37R Plastic cover for footplate support
bar (R)
2
38 Nut
2
39 Flat washer
2
40 End cap for footplate support bar
2
41L Footplate support bar (L)
1
41R Footplate support bar (R)
1
42 Allen head screw
2
43 Allen head screw
4
44L/R Footplate (L+R)
1
set
45 Bushing
4
46 Flat washer
4
47 Spring washer
4
48 Knurled-head screw
4
49 Nut
2
50 Bolt
1
51 Nut
1
52 Plastic washer
1
53 Flat washer
1
54 Spring
1
55 Magnet
1
56 Bolt
2
57 Spring washer
2
58 Flat washer
2
59 Brake axle
1
No. Description
Quantity
60 Bearing
2
61 Sensor cable
1
62 Bolt
4
63 Sensor
1
64 Frame
1
65 Lower computer cable
1
66 Power cable
1
67 Motor
1
68 Bolt
1
69 Flat washer
1
70 Pressure roller
1
set
71 Waved washer
1
72 Pressure roller axle
1
73 Flat washer
2
74 Nut
1
75 Nut
2
76 Belt tensioner
2
sets
77 Nut
2
78 Safety ring
2
79 Ball bearings
1
80 Flywheel
1
81 Flywheel axle
1
82 Ball bearings
1
83 Waved washer
2
84 Plastic cover
2
85 Flat washer
2
86 Allen head screw
2
87 Suspension
2
88 Nylon bearing
4
89 Nut
2
90 Crank end cap
2
91 Round cover
2
92L Housing (left)
1
92R Housing (right)
1
93 Crank
2
94 Bolt
8
95 Allen head screw
4
96 Belt
1
97 Pedal Axle
1
98 Belt wheel
1
99 Flat washer
1
100 Connect joint
2
101 Flat washer
2
102 Flat washer
1
103 Safety ring
1
104 Rear end cap
2
105 Rear Stabilizer
1
106 Bolt
2
107 Tube spacer
2
108 End cap
2
109 Adaptor
1
110 Allen key wrench
2
111 Wrench
1
Required tools (included):
•
Allen key wrench, screwdriver with spanner, multi-purpose tool.
5. ASSEMBLY INSTRUCTIONS
Take all parts out of the packaging carefully and place them on a flat surface. When doing this,
use suitable padding to protect the working surface. Assembly of the individual parts should
be carried out by 2 people!
Before assembly, check the parts list to verify that all parts are present. Some parts have already
been pre-assembled to simplify the assembly process for you.
STEP 1
65
105
32
5
33
5
33
32
34
1.
Attach the front stabilizer (34) to the main body. Secure with 2 sets of flat washers (33),
spring washers (5) and Allen head screws (32).
2.
Attach the rear stabilizer (105) to the main body. Secure with 2 sets of flat washers (33),
spring washers (5) and Allen head screws (32).
Note: You may adjust the rear end caps to compensate for any uneven surfaces.
SP-ET-9800-iE-IM-DE+GB+FR-05.indb 30-31
10/6/2016 2:22 PM
