44
SP OR TDOG .COM
SE
TTI
NG
S
DISPLAY
The DISPLAY screen allows you to configure the brightness display timer and the power OFF timer.
TO CHANGE THE LIGHT DIM TIMER:
1. From the main menu, select
SETTINGS > DISPLAY > LIGHT DIM.
2. Press the Right Arrow Key on the
Menu Selection Pad to toggle among timer SETTINGS: NO, 30 SEC, 60 SEC,
90 SEC. When not in use, the display screen will dim after the number of seconds selected. The default is
30 SEC.
3. Press
BACK to return to the main menu.
TO CHANGE POWER OFF TIMER:
1. From the main menu, select
SETTINGS > DISPLAY > POWER OFF.
2. Press the Right Arrow Key on the
Menu Selection Pad to toggle among timer SETTINGS: NO, 1 HR, 2 HR, 3
HR. If not used, the Handheld Device will then automatically power OFF after the time period selected. The
default is
3 HR.
3. Press
BACK to return to the main menu.
RESET
Reset restores the
Handheld Device to its factory-default settings.
TO RESET HANDHELD DEVICE SETTINGS:
NOTE: Resetting the system cannot be undone. All information including way points will be lost. All collars must
be paired again to the
Handheld Device after reset.
1. From the main menu, select
SETTINGS > RESET ALL. A confirmation screen displays.
2. At the prompt, “ARE YOU SURE YOU WANT TO CONTINUE?” select
YES. The handheld will reset to its default
configuration and power OFF.
ABOUT
From the ABOUT screen you can view your
Handheld Device’s name, ID number, and
software/hardware revision.
