11
SP OR TDOG .COM
GE
TTI
NG
S
TA
RTE
D
STEP::01
PREPARE THE GPS COLLAR/E-COLLAR MODULE
YOU MUST COMPLETE THESE STEPS PRIOR TO USING THIS DEVICE FOR THE FIRST TIME.
TO CHARGE THE GPS COLLAR/E-COLLAR MODULE
1. Attach the supplied Charge Cradle so that the SportDOG
®
Brand
logo on the Charge Cradle covers the SportDOG
®
Brand logo on
the GPS Collar.
2. Connect the appropriate Charger Connector to the
Charging Jack.
3. Plug the Charger into a standard wall outlet.
4. Charge the GPS Collar for 4 hours for the first charge and every
charge thereafter. It is not harmful to let the unit charge more
than 4 hours.
5. When charging is complete, as indicated by the Receiver Indicator
Light flashing green, remove the Charge Cradle.
NOTE: Approximate battery life between charges is 24 hours.
TO TURN THE GPS COLLAR/E-COLLAR MODULE ON
Press the
On/Off Button and release when the Receiver Indicator
Light comes on. The GPS Collar will beep 1 to 5 times indicating which
channel the collar is on.
TO TURN THE GPS COLLAR/E-COLLAR MODULE OFF
Press and hold the
On/Off Button until the Receiver Indicator Light comes on solid red and the GPS Collar beeps
for 2 seconds. To extend the battery life between charging cycles, turn off the GPS Collar when it is not in use.
TEST LIGHT TOOL INSTRUCTIONS
1. Turn the GPS Collar with E-Collar Module on.
2. Hold the Test Light Tool Contacts to the Contact Points.
3. Press a Static Stimulation Button on the
Handheld Device.
4. The Test Light will flash.
NOTE: At higher static stimulation levels, the Test Light will flash brighter.
5. Turn the GPS Collar with E-Collar Module off.
NOTE: If the Test Light does not flash, recharge the battery and re-test. If the Test
Light still does not flash, contact the Customer Care Centre.
