SportDOG Stealth-E Owner'S Manual Download Page 8

Page: 8 / 11

WWW.SPORTDOG.COM

USE STANDBy mODE

The STEALTH™ Radio Locator has an automatic standby mode to conserve battery power for optimal
performance when in the field. In Standby Mode:

• The

Power/Standby Indicator

blinks at long intervals

• The location resets and the collar transmitter must be relocated

TO TURN ON STANDBy mODE:

Point the handheld receiver down toward the ground. The

Power/Standby

Indicator

blinks at long intervals.

TO TURN Off STANDBy mODE:

Hold the handheld receiver horizontally. The

Power/Standby Indicator

blinks at short intervals, and the receiver will begin to search for the
collar transmitter. Refer to the “Track Your Dog” section to find the
location of your dog (Step 5).

TO DISABLE AUTOmATIC STANDBy mODE:

1. Turn OFF the handheld receiver.
2. Turn ON the handheld receiver while pointing the handheld receiver down toward the ground. The

Power/Standby Indicator

light blinks at long intervals.

TO ENABLE STANDBy mODE:

1. Turn OFF the handheld receiver.
2. Turn ON the handheld receiver while holding the handheld receiver horizontally. The

Power/Standby

Indicator

light blinks at short intervals, and the receiver will begin to search for the

collar transmitter.

CHANGE VOLUmE SETTINGS

The handheld receiver provides several options using lights, sounds, and vibration when tracking your dog.

TO CHANGE VOLUmE SETTINGS:

1. Press the Volume Button repeatedly to toggle through available settings, as follows:

Normal volume with vibrations (default setting)

Mute, lights only

Low volume

Normal volume, no vibration

Vibration only

STE

COPy COLLAR PAIRINGS TO OTHER RECEIVERS

The STEALTH™ Radio Locator allows you to share and track a collar with several receivers. Once the collar is
paired to a handheld receiver, you can copy that information to another handheld receiver.

Note: If the collar transmitter is turned OFF, the pairing information must be manually erased from the additional
receivers (see Step 10).

TO COPy COLLAR PAIRINGS BETWEEN HANDHELD RECEIVERS:

1. Hold a receiver in each hand.
2. Press the Transmitter Channel Button

to select an available

channel number on the handheld receiver adding the collar.
The available transmitter number blinks.

3. Simultaneously press and hold the Copy Button on both

handheld receivers. The second receiver will start beeping
at one second intervals. The new channel number displays
on the second receiver indicating the collar pairing has been
copied successfully.

4. Repeat this procedure for each collar transmitter to be shared.

ERASE COLLAR PAIRING fROm THE HANDHELD RECIEVER

Erasing a collar transmitter erases the pairing information on the handheld receiver.
The collar transmitter cannot be tracked until it is paired again to a receiver. Be sure
you know the location of your dog or remove the collar transmitter from your dog
before erasing it.

TO ERASE A COLLAR TRANSmITTER fROm A RECEIVER:

1. Press the Transmitter Channel Button to select the channel number that you want to erase from the

handheld receiver.

2. Press and hold the Transmitter Channel Button and the ON/OFF Button until you hear a series of

random beeps and the

Signal Strength Indicator

lights from bottom to top. The erased channel starts

to blink in the

Transmitter Channel Display

indicating that channel is now available for

pairing again.

RESET THE STEALTH

RADIO LOCATOR

To completely reset the system to its default settings:

1.  Remove the batteries from the collar transmitter.
2.  Remove the battery from the handheld receiver.
3.  Wait five minutes and reinstall the batteries in both devices.

STE