www.sportdog.net
11
Reset the Collar Receiver
To reset the Collar Receiver to work with a new Remote Transmitter or to reprogram a
new Collar Receiver to work with your existing Remote Transmitter:
1.
Turn the Collar Receiver off.
2.
Press and hold the On/Off Button. The Receiver Indicator Light will come on, then
turn off after 4-5 seconds. If the On/Off Button is released too early, the Receiver
Indicator Light will begin fl ashing as normal. If this occurs, start over and repeat the
process.
3.
After the Receiver Indicator Light has turned off, release the On/Off Button.
4.
Press and hold the Upper Button on the Remote Transmitter until the Receiver
Indicator Light fl ashes 5 times. You may need to hold both units 2-3 feet from each
other before this occurs. Once the Receiver Indicator Light has fl ashed fi ve (5) times,
the Collar Receiver has been reset and will begin fl ashing as normal. If the Receiver
Indicator Light does not fl ash 5 times, start over and repeat the process.
_____________________________________________________________
Program the Collar Receiver for Two or
Three-Dog Operation
With the Transmitter set to mode 4, SportDOG Collar Receivers can be set to respond
to the upper, lower, or side Remote Transmitter buttons. SportDOG Add-A-Dog
™
receiver(s) must be purchased to train additional dogs.
1.
Program the Remote Transmitter to mode 4.
2.
Program the fi rst Collar Receiver.
A.
Turn the Collar Receiver off.
B.
Press and hold the On/Off Button. The Receiver Indicator Light will come on,
then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver
Indicator Light will begin its normal fl ashing. If this occurs, start over and repeat the
process.
C.
After the Receiver Indicator Light has turned off, release the On/Off Button.
D.
Press and hold the
Upper Button
on the Remote Transmitter until the Receiver
Indicator Light fl ashes 5 times. You may need to hold both units 2-3 feet from each
other. If the Receiver Indicator Light does not fl ash 5 times, start over and repeat the
process.
3.
Program the second Collar Receiver using
A.
through
D.
above, but using the
Lower
Button
in place of the Upper Button.
4.
Program the third Collar Receiver using
A.
through
D.
above, but using the
Side
Button
in place of the Upper Button.
Step
6
Step
7
