14
5-6 PROGRAM KEY
5-7 STOP & RESET
5-8 COOL DOWN
5-9 Machine Folding
5-10 ERROR
(1) When you press the PROGRAM key, the program will change in the order
shown below:
PROG1 PROG2 PROG3 PROG4 PROG5 PROG6 PROG7
MANU
(2) Each PROGRAM has eight segments. Each segment lasts 60 seconds.
(3) While exercising, you can change the speed of any program at any time. That
change will also apply to the corresponding program from thereafter.
(1) STOP
A workout target value can be set up during a workout or when the
equipment stops. Press the STOP key to stop the machine before the target
value has been obtained. The walk belt will stop moving and the workout
feedback will stop accumulating. To resume your workout, press the SPEED
key. All operations will resume.
(2) RESET
Hold the STOP key down over three seconds to reset all data.
After reaching your exercise goal, the machine will enter COOL DOWN mode.
The speed will slowly decrease until the value reaches 0.
(1) This treadmill folds up for easy storage. Before folding the treadmill, please
bring the incline level to "0". If not, the incline will automatically move to "0".
(2) If E-14 appears while the treadmill is being folded up during workout, than the
motor will stop working. And if the incline level is not in level "0", it will move
to "0" automatically.
(3) The machine cannot be used while folded.
The following error messages (which appear in the MODE window) indicate
malfunctions as explained below:
(1) E-1: Speed malfunction; Please inspect wires from the optic sensor to the
drive board.
→
→
→
→
→
→
→
▲