22
www.sport-thieme.de
08/2021
EN
5.5 Installing the motor drive
A�ach the motor drive unit with the effect wheel to the
rods of the projector. Loosen the knurled screws on the
motor drive holder first. Posi�on the lens of the projector
sufficiently far forward.
1. Place the motor drive unit with the effect wheel on
the rods of the projector, between the light exit and
the lens.
2. Push the motor drive with the effect wheel close
enough to the light exit so that the distance is approx.
2 mm. The effect wheel must not touch the projector.
3. Secure the motor drive to the skids by �ghtening the
two knurled screws.
4. Plug the RCA plug of the motor drive into the RCA-type
socket on the front of the projector.