background image

                                                                                           

          

              IP network intercom terminal User Manual

 

                                                                                      9 

 

Enter into 

“network parameters” setting, the relevant parameters list as follow:                                                                                                                                                         

MAC Add 

The terminal Physical address 

Connection Type 

Static IP: The default is static IP, the user defined IP address information . 

Dynamic IP: Dynamic allocation IP address through DHCP 

IP Add 

The terminal itself IP address, The factory default IP address is 192.168.101 

Subnet mask 

The terminal subnet mask 

Default gateway 

The terminal network gateway 

Preferred DNS 

server 

The terminal`s network preferred domain name interpreter IP 

Standby DNS server 

        The terminal`s network standby domain name interpreter IP   

Device parameters 

 

 

Device NO 

ID The unique identification of the equipment, the factory default device NO is 1 

Receive port 

The device communication port 

Memory card 

choose 

The selected location for files save(automatic:if it detect the SD card when 

started,then use the SD card,otherwise it use the internal Flash. 

On-line service parameters 

 

The server parameters as below: 

Preferred server 

The server IP address of terminal loging, the factory default Preferred server 

address is 192.168.1.13 

Standby server 

When the preferred server unable to connect, it can login on the standby server. 

When the preferred server is connected, restart and login to the preferred server. 

the factory default secondary server address is 192.168.1.14

 

Summary of Contents for NAS-8521A






















Reviews: