Spokey 926745, Manual

Page: 15 / 52

2
www.spokey.eu
INSTALL THE INNER AND OUTER TIRES
1.Fill a small amount of air into the deflated inner tire till the inner tire is
just bulged to look round.
2.Put the hub on the top of a desk, Pay attention to the direction when
installing the outer tire. There is an arrow on the outer tire, and it must be
consistent with the forward direction of the wheel. Use one hand to hold
the hub, and use the other hand to insert one side of the outer tire in the
hub groove.
3.Insert the air valve of the inner tire into the air valve hole. Insert the
inner tire in the outer tire clockwise and in sequence. Make sure that the
air valve does not tilt. Then, insert the other side of the outer tire in the
hub groove. Finally use a crowbar to install the remaining tire lips in the
hub groove. After installation, pinch the outer tire to check if the inner tire
is pressed by the tire lips of outertire.
4.Inflate the inner tire to 15-20 PSI, and check the safety lines at two
sides of the outertire. Make sure that the distances from the safety lines to
the hub edge are consistent.
5.Finally inflate the inner tire to 50 PSI. Tighten the air valve cap. Then,
the tire assembly is completed.
Note: Wrap the pointed end of the crowbar with fiber cloth so that it will
not damage the inner tire and coating of the hub.
SPECIFICATIONS
Performance index items Specifications i
Dimensions
L• W . H [1] (cm) 97x46x103
After folding: L . W . H (cm) 86,5x46x103
Weight Item weight (kg) Approx. 12.5
Riding requirements
Load range (kg) '25-100
Age 16-50
Body length (cm) 120-200
Main parameters Max. speed (km/h) Approx. 25
General range[2] (km) Approx. 25-30
Max. climbing angle (%) Approx. 15
Suitable surfaces
Cement, asphalt and mud roads; bench lowerthan ,
lcm; crevice narrower than 3cm
Operating temperature (°C) -10-40
Storage temperature (°C) -20-45
Waterproof IPX4