Spokey 926731, User Manual

Page: 19 / 55

17
www.spokey.eu
www.spokey.pl
USER’S GUIDE
NOTES Please keep this operation manual for future use. This exercise machine is intended for home use only.
TECHNICAL SPECIFICATIONS
Dimensions of the assembled exercise machine: 155 x 83 x 135 cm
Running belt: 121,5 x 48 cm Maximum weight of the user - 100 kg
Voltage: ~ 220-240 V (50/60Hz)
Prior to assembling this exercise machine and before the start of the
training, you should read carefully the following instructions. Safe and
effective use of the equipment can be ensured only if it is put together,
maintained, and used properly, as described herein. If you are not the user
yourself, please pass this operation manual to all users and inform them
about all the hazards and precautions.
Before beginning an exercise program, consult with your doctor to
determine whether there are any mental or physical conditions which could
pose a risk to your health and safety. Talking with your doctor can also
protect you against the improper use of the equipment. Your doctor will
determine whether it is suitable to use medications that affect the heart rate,
blood pressure or cholesterol.
Pay attention to your body’s signals. Improper or excessive exercises can
negatively affect your health. An exercise should be discontinued
immediately if you experience any of the following symptoms: pain,
tightness in the chest, irregular pulse, particularly shortness of breath,
fainting, dizziness, nausea. If any of these symptoms occur, you should
contact your doctor immediately and stop training theretofore.
Children and pets should be kept away from the equipment. The exercise
machine is intended only for adults.
The equipment must be placed on a smooth, solid and hard surface, which
is secured by a mat or carpet. The exercise machine is intended for internal
use only.
Before beginning an exercise program, make sure that all bolts and nuts
are thoroughly tightened up. Please pay special attention to the parts that
are most exposed to wear.
Safety of the equipment can be guaranteed only if it is maintained and
inspected on a regular basis.
You should always use the equipment for its intended purpose. If during its
installation or use whichever part proves to be defective, or it produces
disturbing sounds, you should stop using the equipment and return it to the service and repair shop. Damaged parts must be replaced immediately or
you must stop using the exercise machine until it has been repaired. Do not
use damaged equipment.
During your training, you should wear proper exercise outfits. Avoid loose
clothing that could catch on equipment and cause an injury or clothes that
could restrict or prevent your movements. Make sure to remove any
jewellery during your workout.
When running, make sure the plastic clip is fastened on your clothing. It is
for your safety, should you fall or move too far back on the treadmill. Keep
hands away from all moving parts
the equipment has been categorized as H operational use class and C
accuracy class, and it is designed exclusively for home use. It cannot be
used as therapeutic or rehabilitation equipment. The equipment is not
suitable for therapeutic purposes.
The maximum permissible weight of the user is 100 kg
’s.
When lifting or moving the equipment, you should maintain a proper
posture to prevent any damage to the spine.
During installation of the equipment, you must strictly adhere to the
enclosed instructions and make use of the supplied parts only. Before
installation, check whether all the parts that are contained on the attached
list, are included.
It s not recommended to leave any adjustment device, which could interfere
with the user’s movements, in such a position that protrude any part thereof
WARNING: Before using the magnetic treadmill, please read these
instructions. We do not accept any liability arising from any injury or
damage to any items that have been caused by misuse of this product.
WARNING! Heart rate monitoring system May be inaccurate. Over
excercising May result In serious injury or death. If you feel faint stop
excercising immediately.
Health injury may result from the incorrect or too intensive training.
ASSEMBLY
PREPARATIONS
1. Before assembly make sure there is enough space.
2. Use the recommended tools.
3. Before assembly check if there are all the parts in the box.
It is recommended that product should be assembled by at least two people
to avoid injuries. Most of the assembly equipment listed here has been packed separately,
but some elements come preassembled in certain assembly parts. If it is
required, dissassemble them and assemble again.
Read the instructions of all assembly steps and familiarize with all the
devices installed.
ASSEMBLY INSTRUCTIONS (DRAWINGS
– P. 7-8)
ATTENTION! Do not connect the device to the power source until you finish
the assembly.
STEP 1 Carry out the machine from the package by two persons and place
it lightly on flat floor, and put other fittings beside the machine.
Lift the display in the direction of arrow A to the position shown in Figure 2.
Use 2 knobs M10x44 to fix the display and upright tube.
One person standing on the running platform and pushing the display and
upright tube to the angle of the arrow B (as shown in Figure 3), use two
M10X69 knobs to fix the upright tube and running platform.
STEP 2 Put on safety key ,turn on power switch,then press start key to use
STEP 3 When finish using,,fold the the treadmill to save space:
first remove 2pcs knob M10X69 , then put the display and the upright tube
into the angle (as shown in Figure 5) according to the direction of arrow C,
then remove 2pcs knob M10x44 and fold them (as shown in Figure 6); Fix
2pcs knob M10x69 again, then lift the treadmill in the direction of arrow D
to make treadmill in a vertical position.
..
FOLDING AND TRANSPORT OF THE TREADMILL
Don't try to move the treadmill if it's not folded and locked. Make sure that
the plug is disconnected from power supply.
To set the treadmill in the vertical position it is necessary to fold the console
handles. After the treadmill in vertical position,kick the limit valve to the
direction of the arrow E until it is separated from the bracket, then move the
wheel to the position of the G arrow to the F position, storage (Figure 8, 9)
. When the treadmill is needed, the treadmill bracket must be fixed to the limit valve as shown in Figure 8, and then installed according to Figure 1 to
Figure 4. ATTENTION: Folded treadmill cannot be operated and utilized.
Stop the treadmill belt before folding the equipment. Folded treadmill
should be disconnected from power supply. Don't start the treadmill when
it's folded.
To move the treadmill, raise it gently onto the rear transport rolls and move
it to the desired location, holding on both sides.
TREADMILL SPOKEY FORRO
– SPECIFICATION
SAFETY NOTES
ASSEMBLY, SETUP AND MAINTENANCE
EN