SPM GT Push 1, Operator'S Manual

Page: 25 / 68

Data di emissione: Dicembre, 2018 Revisione: 2 Pag. : 25/68
The machine must be stored in a dry place with
temperatures from 0°C to 40 °C. No more than
2 machines should be stacked on top of each
other, taking care to maintain the vertical
position, as shown by the arrows on the carton.
5. TECHNICAL SPECIFICATIONS
Technical and electrical specifications
All the machine’s technical and electrical
specifications are stated on the identification
plate, positioned in the internal part of the
equipment; a sample is shown here below.
The plate specifies:
•
Model: XX
•
n°: XX
•
Electrical specifications: Volt/ Hz
•
Max. absorption (Watt)
•
Max. current (Amp)
•
Machine ambient working temperatures
between
75 and 90°F .
Dimensions and weight:
GT1
•
Height: 65 cm
•
Width: 26 cm
•
Depth: 42.5 cm
•
Weight 28 kg
GT2
•
Height: 65 cm
•
Width: 45 cm
•
Depth: 42.5 cm
•
Weight 46 kg
Noise emissions
The continuous, equivalent, weighted level of
acoustic pressure is below 70 dB.
In the event of breakdown:
In most cases, any technical problem can be
settled with slight interventions (please see the
troubleshooting guide at the end of this
manual); we therefore recommend you to
carefully read this handbook before contacting
the manufacturer or service centre.
Disposal
Caution
All the parts of the packaging must be kept
beyond the range of children, as they might
represent a potential safety/health risk.
Important
In respect of the environment, please dispose
the packaging as illustrated.
This symbol: means that the machine
cannot be disposed as common waste. It must
be handled in compliance with the provisions of
European
directive 2003/108/EC (Waste
Electrical and Electronic Devices - WEEE) and
the resulting national legislation, in order to
prevent
any potential damage to the
environment and to create health risks.
In order to correctly dispose of the device,
please contact the distributor from which you
purchased it or our after-sales service.