Splitty – User Manual
Splitty.nl
5) Clamping
of the connectors.
At every end of the connection cables it will be necessary to clamp the connector plugs
(identical connectors to those used for telephones). Careful caution should be applied in
correctly connecting the cables with the appropriate tools. The telephone connectors
plug are of type 4P4C (also known as type RJ10). Do not use connectors 6P4C (RJ11) for
they are not compatible with the Splitty and will not fit.
Wiring
:
View from above.
Note: The colors of the internal cables could differ, but the layout of the wiring
should still be the same.
It is very important to connect the plugs correctly otherwise the system will not work
correctly. You could use an Ohm meter to test if there is a good contact between the
different connection plugs. This way you can avoid difficulties and malfunctions later on.
