Splitty – User Manual
Splitty.nl
8)
Troubleshooting.
Problem:
Without warning after some days of regular operation all the decoders have stopped to
work at the same time, darkening the screen.
Solution:
Remove the Smartcard from the central unit and insert it directly in a decoder and wait
for a few minutes until the reception of the new codes. Then reinsert the card into the
central unit. In the event it still did not work call your Pay-Tv subscriber or visit their
website and request new transmission of the codes.
Problem:
The Led in the Central unit does not flash.
Solution:
Check if the power feed is correct like stated in the handbook.
Problem:
The Led remains lid and does not flash.
Solution:
The problem can reside in the from the dummy smartcard, if the connections from the
wires have not been connected correctly. Or the original Smartcard used is not
compatible. Check that the Smartcard is compatible and that the wires have been
connected correctl
y.
