Super Shred 3
Owners Manual
Safety
9
2.3 Storage Safety
Important!
When storing your Super Shred 3 special attention should be drawn to the
areas listed below.
2 Weeks - 1 Month Storage
Before storage it is important that the machine is clean. Any time the
machine is left for more than 2 weeks, the machine must be cleaned
thoroughly. The cleaning process must include cleaning the upper hopper,
degreasing shredder rotors and scraper bars, and removing any remnants
from below the shredding box. It is also important to turn off the master
switch and lockout the machine, so accidental operation cannot occur.
When the machine is removed from storage, and prepared for operation, a
safety switch inspection must occur. After a safety switch inspection, the
machine is ready for operation.
1+ Month Storage
All the steps must occur as with the 2 Week – 1 Month Storage cycle. It is
important to ensure that the machine is clean to prevent any corrosion or
drying of material to machine surfaces. It is also important to turn off the
master switch and lockout, so accidental operation cannot occur. In
addition to switch inspection upon restarting after inspection, the gearbox
oil level must be checked, belts inspected for dryness, and spur gears
greased. (see page 11).