Super Shred 3
Owners Manual
Maintenance
17
4.1 General Maintenance
1. Gear Oil
This machine has 1 gear reducer, which needs
maintenance at regular service intervals.
Change interval: 2500 Hrs.
Oil Type: 80W-90
If the daily average use is 2-4 hours, the gear oil
should be changed every 2 years.
Method: Remove lower front cover on Shredder (10 - ¼” x
20 button head bolts). Then remove the drain plug so all
gear oil can drain. Replace the drain plug (Thread seal plug
to ensure a proper seal). Then refill the gearbox with 80W-
90 gear oil via the plug at the halfway point on the gearbox.
Easiest fill method is typically completed with a gear oil
bottle and hose. Do not overfill past the halfway point on the
gearbox. When complete, replace the plug in the side of the
gearbox. Gearbox service is then complete.
2. Greasing
This machine has 1 grease fitting. The grease fitting is
located on the back, in the center of the machine. Greasing
must
be done while the machine is running.