Splendide WDC7200XCD, Instructions For Use Manual

Page: 7 / 16

7
Detergents and
Additives
Wash cycle
Temperature
Spin
Speed Recommended
Load Size
Duration
(minutes)
Prewash
(**)
Wash
Fabric
softener
Bleach
(**)
1 2 3 4
Default/Max Min Default
Whites Hot/Hot Cold Fast Full
The dur
ation of the w
ash c
ycles can be checked on
the displa
y.
   
Colors
Warm/Warm Cold Fast Full -
 
-
Regular Warm/Hot Cold Fast Full
  
-
Express
Warm/Warm Cold Fast Full -
 
-
Dry Cotton
- - - Half
NOTE: A high spin is carried out during the 2:35'
Timed Dry using the Cotton Dry cycle.
Perm Press Warm/Warm Cold Fast Half -
 
-
Lightly Soiled
Warm/Warm Cold Fast Half -
 
-
Dry Synthetic - - - Half - - - -
Delicates
Cold/Cold Cold Fast Half -
 
-
Silk Cold/Cold Cold Off Quarter -
 
-
Dry Wool
- - - Half - - - -
Wool Cold/Cold Cold Fast Quarter -
 
-
- - - Empty - - -

Rinse + Spin Cold/Cold Cold Fast Full - - - -
Spin + Drain *
- - Fast Full - - - -

Required dosage

Optional dosage
- The recommended load size refers to the visual size of the load in the drum i.e. " half " means the drum should be approximately half full.
WASH CYCLES
Follow the instructions on the symbols of the garment’s
wash care label. The value indicated in the symbol is the
maximum recommended temperature for washing the
garment.
NOTE: The machine remembers your last option selection for Temperature
and Spin Speed, and will use it for future wash cycles until you deselect that
option i.e. if temperature is changed from the default setting on the Regular
wash cycle, the machine will use this modified setting next time a Regular
wash cycle is selected.
To restore factory defaults for Temperature and Spin Speed, refer to the WASH
CYCLE TABLE.
Whites
Use this cycle when using liquid chlorine bleach.
Pour the bleach, the detergent and the additives into the relevant compartments.
Colors
This cycle is intended for use with colored fabrics, including cotton
and synthetic garments.This cycle is designed to use less hot water, and
is suitable for lightly soiled garments.
Regular
Suitable for washing normally soiled cottons and linens.
Express
This wash cycle was designed to wash lightly soiled garments quickly. By
selecting this wash cycle (
“Express”
at WARM temperature), it is possible to
wash different fabrics together (except for wool and silk items).
Perm Press
This cycle has less mechanical agitation and lower spinning speed
designed to reduce wrinkles.
Lightly Soiled
This wash cycle was designed to wash lightly soiled garments quickly.
By selecting this wash cycle ( “Lightly Soiled” at WARM temperature),
it is possible to wash different fabrics together (except for wool and
silk items). For this cycle we recommend pretreating stains, shirt necks
and wrists with specific antistain products.
This cycle is also used for winterization. Refer to the RV/MARINE
WINTERIZATION section for details.
Delicates
For washing very delicate garments. It is advisable to turn the garments
inside out before washing them.
Silk
Use special wash cycle to wash all silk garments. We recommend the use
of special detergent which has been designed to wash delicate clothes.
Wool
For washing wool garments. For best results, use special detergents and
do not exceed the maximum recommended load indicated in the
“Wash Cycle Table.
Clean Washer
This cycle uses a higher water volume in combination with regular
liquid chlorine bleach to thoroughly clean the inside of the washer-
dryer. Do not use thickened or splash-less bleach for this cycle. When
using this cycle, the drum must be empty.
Rinse + Spin
Rinses and then spins. For resilient garments.
Spin + Drain
Spins the load then empties the water. For resilient garments. If you
exclude the spin cycle using the button, the machine will only drain.
DRY CYCLES
To perform a dry only cycle, turn the cycle selector knob to either Dry
Cotton, Dry Synthetic, or Dry Wool. Then, choose Timed Dry or Iron Dry
using the respective buttons. You must choose either a Timed Dry or Iron
Dry option, or the dry cycle will last 0 minutes. Note that for best drying
performance, avoid tightly packing the drum. The drum should be
approximately half full for best performance.
Dry Cotton
Cottons and linen items.
Dry Synthetic
Synthetics and synthetic-blend items.
Dry Wool
Wool or gentle hand wash items.
A Timed Dry or Iron Dry can be used with any of the three dry cycles
above.
Timed Dry
To activate a Timed Dry, press the
Timed
Dry
button and ensure the icon is lit
on the display. To change the duration of the timed dry, press the
Timed
Dry
button until the display shows the desired amount of time. To turn off the
Timed Dry feature, press the
Timed
Dry
button until the icon is no longer lit.
Timed Dry options include Off, 25’, 45’, 1:15’, 1:45’, 2:15’, 2:35’.
2:35’ timed dry is only available for select cycles. When using the Timed
Dry feature, the dry cycle will only last as long as the selected time, and
then end regardless of the dryness level of the load inside the drum.
Iron Dry
To activate Iron Dry, press the
Iron
Dry
button and ensure the icon is lit on
the display. To turn off the Iron Dry feature, press the
Iron
Dry
button and
ensure that the icon is no longer lit.
When Iron Dry is used, the dry cycle time may vary depending on the
saturation level of the load, fullness of the drum, and type of load. The
load should still be damp at the end of the dry cycle.
WASH + DRY CYCLES
To perform a wash + dry cycle, turn the cycle selector knob to the desired
wash cycle. Then, use the Timed Dry or Iron Dry feature to add a dry
cycle.
See
DRY CYCLES
section for instructions on how to activate a
Timed Dry
or Iron Dry cycle.
DISPLAY
The display is useful when programming the washer-dryer and provides
plenty of information.
C
B
A
Slow Cold
Hot
Spin+
Drain
Wash Rinse Dry
Fast
D
D
B
Temp
Spin
The duration of the available wash cycles and the remaining time of a running
cycle appear in section A ( Factors such as load size, modifiers, options
selected, and water pressure may affect the time shown in the display.
Tightly packed loads, unbalanced loads, or excessive suds may cause the
washer-dryer to lengthen the cycle time as well); if the DELAYED START
option has been set, the countdown to the start of the selected wash cycle
will appear.
In section
B
pressing the corresponding button allows you to view the
maximum spin speed and temperature values attained by the machine
during the set wash cycle, or the values selected most recently, if these
are compatible with the set wash cycle.
The “wash and dry cycle phases” corresponding to the selected wash
cycle and the “wash and dry cycle phases” of the running wash cycle
appear in section C :
Wash
Rinse
Spin + Drain
Dry
References
D
indicate the Dry options available (See “DRY CYCLES” section).
The “Delay Start” symbol , when lit, indicates that the set “delayed start”
value has appeared on the display.
The symbol indicates the possibility to silence the key tones
While the mute is active, almost all sounds will be turned off. Only the sound
signals and the alarms remain active, as well as the sound of the end of cycle.
For activate/deactivate the mute press and hold button.
Key Lock
To lock the control panel, press and hold the “Key lock” button for
approximately 3 seconds. The symbol will light up on the display to
indicate that the control panel has been locked (with the exception of the
“ON/OFF“ button). This prevents unintentional changes to programs,
especially with children near the machine. To unlock the control panel,
press and hold the “Key lock” button for approximately 3 seconds .
Locked door indicator
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns off before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button ; if the symbol is off, the door can be opened.