Splash On Tap, Installation Manual

Page: 4 / 7

P a g e | 4
www.SPLASHwash.com Questions? (888) 784-0802
Step 3: Plumbing the water line

Thread the bung tube into the 55 gal methanol drum.

Secure the quick connect to the bung in the drum. Make sure the quick connect is snug.

Attach the methanol hose from the quick connect to the manifold located in the proportioner.

Make sure the 55 gal drum of methanol is grounded! (Wire and alligator clip is recommended)

Drill a 7/16” hole in the center of the concentrate spout cap.

Locate the concentrate hose inside the proportioner and through the top of the 7/16” hole.

Insert the concentrate screen into the end of the concentrate tube, then screw onto the 5 gal
pail of concentrate.
NOTICE: THE METHANOL BARREL MUST BE GROUNDED
NOTICE: A back-flow preventer in compliance with local
and/or state requirements must be installed on the water
line to bring the unit to safety standards.