background image

P a g e

 | 

 

www.SPLASHwash.com

 

Questions? 

(888) 784-0802

 

 

COMPLIANCE WITH LAW 

The Equipment is designed to dispense windshield washer fluid containing methanol, which is a 
volatile organic compound (VOC).  The United States Environmental Protection Agency (EPA) regulates 
the use of VOCs and specifically limits the amount of methanol that can be used in products.   
 
The Equipment must be used in compliance with federal, state, and local laws and regulations.  The 
EPA has regulated that under no circumstances shall there be more than 35% methanol by weight in 
the final product.  Please see the following website for more details: 

http://www.gpo.gov/fdsys/pkg/FR-1998-09-11/pdf/98-22660.pdf

. The concentrate provided by the 

manufacturer and distributor must be diluted to comply with federal, state, and local VOC regulations.  
For example, California, Arizona, Georgia, Texas and Oregon all have state and/or local laws that 
further regulate the amount of methanol that can be in products.  Other states may have such laws as 
well.  The customer is responsible for ensuring that he or she properly dilutes the methanol 
concentrate to be in compliance with all federal, state, local laws and regulations.  
 
Although the manufacturer has attempted to ensure that its equipment complies with all federal, state 
and local laws and regulations, neither the manufacturer nor the distributor can be responsible for nor 
guarantee that the customer will use the equipment in accordance with all laws and regulations.  
Therefore, customer agrees that neither the manufacturer nor the distributor shall be held responsible 
or liable for the use of this equipment in violation of federal, state and local laws and regulations.  In 
addition, customer acknowledges and agrees equipment must be properly installed according to federal, 
state and local laws and regulations, to include a back-flow preventer on the water line.  It is customer’s 
the responsibility to comply with federal, state and local laws and regulations pertaining to proper use 
and installation of the equipment. 

 

 

 

 

 

 

NOTICE: THE METHANOL BARREL MUST BE GROUNDED 

NOTICE: A back-flow preventer in compliance with local 
and/or state requirements must be installed on the water 
line to bring the unit to safety standards. 

 

 

 

Summary of Contents for On Tap








Reviews: