P a g e
|
3
www.SPLASHwash.com
Questions?
(888) 784-0802
40-SOTWD Set-Up Instructions
Step 1:
Finding a location for the proportioner
Locate an area for tank installation, if possible near the air pump for the overhead reels and
water line.
Unit must be hung on a concrete wall.
Step 2:
Installing the unit on the wall
At the final location of the unit measure and mark a level line 50” from the floor.
Detach metal wall bracket from the back of the unit.
Place the bottom of the metal bracket level with the line and mark the four mounting holes.
Re-attach metal bracket to the proportioner using all six bolts, making sure they are all snug.
Using a hammer drill, drill the four pre-marked holes with a 5/8” bit.
Install the four 3/8” lead anchors into the holes.
Hang unit on the wall using the four predrilled anchors. Secure with the supplied washers and
screws.
