11
4. Tighten Fittings – Make sure all fittings connecting the pump and filter are tight.
5. Tape – Wrap Teflon tape on the threads of the Ball Valve (O) going into the Wall Fitting (H) and screw tightly into the
Intake Wall Fitting.
6. Attach Hoses – (Be sure to use only Teflon tape on all Threaded Fittings. Do not use the Teflon tape, however,
on the hose side of the Threaded Fittings. DO NOT USE PIPE SEALANT.) Take one of the hoses and attach
one end (H) to the Ball Valve (O) using a Gasket. Take the other end (I) and attach it to the suction side of the
pump and filter with a Threaded Nipple and a Gasket. Note that “hose side” is imprinted on the Threaded Nipple
for your convenience. Once sealed, hose will not spin. Next, attach one end (I) of the second hose to the Return
Wall Fitting (H) with a Gasket. Twist the threaded elbow into the Wall Fitting before attaching the hose. Then
take the other end (I) and attach it with a Threaded Nipple and a Gasket to the Filter Canister. It is helpful to
twist the Threaded Nipple into the Filter Canister before the hose. DO NOT USE PIPE SEALANT. Make sure all
connections are tight.
7. Warning Label – Affix the Warning Label on the pool liner at the Top Rail next to the Floating Skimmer. If the
Floating Weir and the internal basket of the Skimmer are removed, the resultant strong suction can trap hair or
other body parts if they are inserted into the skimmer. Due to this potential hazard, we are recommending that
you affix the Warning Label.
WARNING: NEVER work on pump, filter, or
skimmer while pump is operating or serious
injury could occur due to strong suction.
O
I
I
I
H
I
Completed Filtration System
©
2003-Splash Superpools Ltd.