© 2018 SPL Parts, Inc
www.splparts.com
Questions?: 512-691-9002
Thank you for your purchase of this SPL performance suspension product.
Please follow these instructions exactly to ensure that the product is able to
function to the best of its ability, and you can achieve the most performance
out of your vehicle.
1.
Raise the front of the vehicle and place jack stands in the OEM
recommended locations.
2.
Remove the front wheels from the car and put them aside.
3.
Remove the factory tie rod ends. These parts are circled in red in
the image above.
4.
Insert the tie rod shank (3) into the spindle. Use the two supplied
5/8” regular (non-locking) nuts (7) and jam the nuts together to
help hold the tie rod shank. Torque the nut on top of the knuckle to
75
ft.-lbs.
Do not use an impact gun or over torque, as the
strength of the tie rod end will be severely compromised. SPL Parts
is not liable for any issues due to overtorque.
