7
S T E R E O
A
Ap
pp
plliicca
attiio
on
n 3
3::
The S
TEREO
V
ITALIZER
inserted
between Compressor und
Recorder.
In the field of electronic music, the S
TEREO
V
ITALIZER
can be used to add
new range and depth to samplers and synthesizers and also to further
process existing effects such as delay and reverberation. Even budget
instruments and processors with limited audio bandwidths can be made
sound full-bodied and detailed.
If you want to use a compressor in the master chain after the console, use
your S
TEREO
V
ITALIZER
after the compressor. You can then be sure that the
S
TEREO
V
ITALIZER
will receive a level-corrected signal which helps him to
even operate more precise. If you use the S
TEREO
V
ITALIZER
before the
compressor negative side-effects such as pumping even could be emphasized.
Tape duplication is often made at high speed resulting in a deterioration
of the high frequency spectrum of the copies. By processing the output
from the source machine, additional brightness can be added to compen-
sate for deficiencies in the copying system. It may also be necessary to
modify the bass end as many high speed systems fail to reproduce the bass
end of the spectrum faithfully. In both areas, the S
TEREO
V
ITALIZER
is both
effective and simple to set up.
Real-time duplication is getting more and more popular. In that applica-
tion the S
TEREO
V
ITALIZER
offers the same advantages as described under
»Studio« and »Video & Film Post Production«.
The S
TEREO
V
ITALIZER
is perfectly suited to the production of radio jingles,
commercials and station idents. Because of the psychoacoustic nature of
the processing, the treated signal will appear louder, closer, brighter and
more intelligible than whatever was played immediately beforehand, thus
creating a powerful impact.
In commercial radio, the S
TEREO
V
ITALIZER
can be used to process the
entire on-air signal helping the radio station stand out from the competi-
tion. The integral surround processor can also be used to create a wider
stereo spread which is important when most of the audience are listening
on systems with a narrow speaker geometry such as is the case with in-car
sound and portable stereo music systems.
Tape -
Duplication
Broadcast
