Performer s1200 – Quickstart
Performer s1200 – Quickstart
4
5
EN
DE
Performer
s1200
Stereo Power Amplifier
VOLTAiR
120V DC Audio Rail
PWR
PROTECT
TEMP
Power up
Turn down the volume of the connected preamplifier.
Switch on mains switch on the rear of the Performer s1200 (On = I).
Power LED lights up.
Standby
The Standby function requires an AMP CTL connection to an SPL device
supporting an AMP CTL output or a 12V trigger controller.
In standby the Power LED is dimly lit.
Power down
Turn down the volume of the connected preamplifier.
Switch off mains switch on the back of the Performer s1200 (Off = O).
Power LED no longer lights up.
Gain trim
You can trim the amplification gain with the trim switches on the rear of the unit
to adjust playback levels in multi-speaker setups.
Input switch
You can switch the input source between XLR or RCA. You can not use both at
the same time.
10
11
12
13
14
15
Power LED
16
12 14
11
