S o u n d P e r c u s s i o n L a b s . c o m
6
AttachingtheBassDrumPedal
1.
Insert the felt beater into
the bass drum pedal
sprocket and tighten
with the drum key.
Beater
Pedal
3.
Tighten the wing nut
on the toe clamp
until secure.
2.
Attach bass pedal to
the bass drum hoop
via the toe clamp.
Toe Clamp
Hardware:
D4420,D4522
SnareDrumStandAssembly
1.
Extend legs to open position and tighten wingnut.
2.
Insert snare basket into stand base and
tighten the wing nut at the desired height.
3.
Adjust the basket to the desired angle with the
tilter assembly.
4.
Place drum in snare basket. The basket can
be adjusted to grip and fit the drum.
Snare Basket
Tilter
Assembly
Height
Adjustment
Stand Base
Adjustment
CymbalStandAssembly
1.
Extend legs to open position. Tighten wing nut.
2.
Slide upper tube into stand base and set
desired height by tightening wing nuts.
3.
Place cymbal (D4420 cymbals sold separately)
between felt pads. Tighten wing nut above
cymbal only enough to hold cymbal and felts,
but loose enough to let cymbal move freely
when struck.
4.
Set desired cymbal angle using tilter
adjustment.
Cymbal goes here
Tilter Adjustment
Wing Nut
Upper Tube
Stand Base
Basket Adjustment
Sprocket
10186 SPL D4420 D4522 Assembly Manual.indd 7
6/12/14 4:20 PM
