15
Crimson
Content
Mic Inputs
You can connect dynamic, condenser, tube, and ribbon microphones to the mic inputs.
Use the 48 V switch to provide phantom power to the microphones that require it. For
more information, read the section “48 V” on page 32.
Specifications:
XLR balanced (Pin 1=Ground, Pin 2=hot, Pin 3=cold)
Input impedance: 10 kohms
Maximum input level: +14.5 dBu (Mic Gain control hard left).
Frequency Response: 10 Hz - ›200 kHz
Noise: -90 dBu (unweighted, 30 dB gain, input termination 150 ohms)
Equivalent Input Noise: -128 dBu
Common Mode Rejection Ratio: > -70 dBu (at 1 kHz with 0 dBu input level/unity gain)
THD+N Ratio: 0.003 % (at 1 kHz, 30 dB gain, input termination 150 ohms)
Connections
