8
Check the
Enabled
checkbox and enter the IP address of the device in
IP
and
Port
fields of the
LAN Config
region.
Save configuration by pressing
Save configuration and close page
button.
Disconnect the device form USB port.
Restart the
Measuring Center
.
If the connection is established, you will see your Next-Lab device in the list of devices on the
Config
tab.
Please note that:
The Wi-Fi module might require some time (1-2 minutes) for connecting.
If the module is unable to connect within 2 minutes, it goes into sleep mode, and for
reconnecting the module the device has to be restarted.
In some cases for successful connection the Wi-Fi access point/PC/smartphone/tablet PC should
be restarted.
Setting of a Tablet PC/smartphone
Switch on the Next-Lab device and wait until it is completely booted (the Power indicator glows
constantly).
Launch the
Measuring Center for Android/iOS
on your tablet PC/smartphone.
Open the
Config
tab from the main menu of the program.
Skip the next step if you know IP address and port of the device.
Press
Lan Search
button and wait until the device is detected. Select a device from the list of
detected devices:
Android
iOS
If you have performed search, fields
IP address
and
Port
will be filled in automatically.
Otherwise fill this information manually.
Check the
Using in Search
checkbox.
If the connection with the device was successful your Next-Lab device will be shown in the
Input
Device
list.
Select it and exit configuration.
