08/2005
510200020-510230020
11/26
Pneumatic Chain Saw 5 1020/5 1021/5 1022/5 1023
MAINTENANCE AND REPAIRS
Turn screw (1) to the left until clamp nut (2) lies close to the left of housing recess.
Loosening the chain-brake:
Press hand protection (3) against the pipe handle.
Pull on protecting gloves
Put on the chain (starting at the bar nose).
Put the guide bar over the screws (4). (The cutting edges have to face to the right) and put the
fixing bore (5) over the pin of the clamp nut. At the same time put the chain over the sprocket
(6). Turn adjusting screw (7) to the right, until the chain still hangs out a little bit and the noses
of drive links are put into bar groove.
Attach the cover back and tighten the nuts lightly by hand.
After this adjust tension of chain. (Segment „Adjust tension of chain“)
