16
1. Inspect the unit every day to confirm that it is safe
and in proper working order before putting it into
service. Follow the
“DAILY INSPECTION
CHECK LIST”
in the SERVICE / CARE section
as a guide. If the unit is damaged or faulty in
anyways, DO NOT use it and immediately contact
your authorized Spitwater service agent for
advice.
TO START
1. Always wear appropriate Personal Protective
Equipment. (PPE)
2. Press the ON power button (I).
TO USE
1. Release the spray gun trigger lock.
2.
Pull the trigger on the spray gun and allow
water to run through the system for a few
minutes to expel air from the hydraulic system.
If air remains in the system, open and close the
spray gun a few times to expel.
Note: If this is
the first use of the unit or the unit has been
left idle for an extended period of time it is
advisable to run this operation with the front
part of the lance disconnected in order to
avoid debris or scale being lodged in the nozzle
and blocking it.
3. Check that the pressure indicated on the pressure
gauge matches the value on the data plate and in the
technical data. Also check that when the trigger is
released the pressure shown on the gauge returns to
zero.
GENERAL PRE-START CHECK
OPERATING INSTRUCTIONS
USAGE TIPS:
Use the unit as necessary to carry out cleaning
while trying to minimize where possible opening
and closing the spray gun trigger as this will lead
to premature wear of the parts.
Do not hold the nozzle too close to the surface
to be cleaned as this may damage the nozzle.
Start cleaning at a comfortable distance and
work closer as necessary.
Summary of Contents for SHW68
Page 23: ......
