Spirit XRW600, Owner'S Manual

Page: 6 / 40

6
Important Electrical Instructions
WARNING
NEVER
remove any cover without first disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance
of your Rower may be affected. Such conditions are not covered
under your warranty. If you suspect the voltage is low, contact your
local power company or a licensed electrician for proper testing.
NEVER
expose this Rower to rain or moisture. This product is
NOT designed for use outdoors, near a pool or spa, or in any
other high humidity environment. The operating temperature
specification is 40 to 120 degrees Fahrenheit, and humidity is 95%
non-condensing (no water drops forming on surfaces).
Circuit Breakers:
Some circuit breakers used in homes are not
rated for high inrush currents that can occur when a Rower is first
turned on or even during use. If your Rower is tripping the house
circuit breaker (even though it is the proper current rating) but
the circuit breaker on the Rower itself does not trip, you will need
to replace the home breaker with a high inrush type. This is not
a warranty defect. This is a condition we as a manufacture have
no ability to control. This part is available through most electrical
supply stores. Examples: Grainger part # 1D237, or available online
at www.squared.com part #QO120HM. The electrical outlet used
should have a dedicated 15 amp circuit breaker.
Grounding Instructions
This product must be grounded.
If the Rower should
malfunction or breakdown, grounding provides a path of least
resistance for electric current, reducing the risk of electric shock.
This product is equipped with a cord having an equipment-
grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
DANGER - Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are
in doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product if it will
not fit the outlet; have a proper outlet installed by a qualified
electrician.
This product is for use on a nominal 110-volt/15 amp
dedicated circuit, and has a grounding plug that looks like the
plug illustrated below. A temporary adapter that looks like
the adapter illustrated below may be used to connect this
plug to a 2-pole receptacle as shown below if a properly
grounded outlet is not available. The temporary adapter
should be used only until a properly grounded outlet,
(shown below) can be installed by a qualified electrician. The
green colored rigid ear-lug, or the like, extending from the
adapter, must be connected to a permanent ground such
as a properly grounded outlet box cover. Whenever the
adapter is used, it must be held in place by a metal screw.