![background image](http://html.mh-extra.com/html/spirit/xe395-elliptical-spt0065/xe395-elliptical-spt0065_owners-manual_1348375011.webp)
10
STEP 4:
Plastic Parts
1. Install the two Wheel Covers (
79
-Left &
80
-Right) with four Phillips Head Screws (
115
).
2. Install the Center Cover (
85
) with two Phillips Head Screw (
115
). You need to raise the incline to install
the Center Cover.
3. Install the Swing Arm End Cap Covers (
81
&
82
-Left,
83
&
84
-Right) with the eight Sheet Metal Screws
(
119
).
4. Install the two ‘Z’ shaped metal brackets (
180
) as shown with four Phillips Head Screws (
122
). The Z
Brackets should be installed so the tab with the tapped hole is pointing toward the rear.
5. Install the Rear Incline Cover (
87
) with two Phillips Head Screws (
115
). Install the Rear Stabilizer Cover
(
88
) with four Phillips Head Screws (
115
).
HARDWARE
#119.
3.5 × 12mm
Sheet Metal Screw
(8 pcs)
#115.
M5 ×15mm
Phillips Head Screw
(12 pcs)
#122.
M6 × 10mm
Phillips Head Screw
(4 pcs)
Summary of Contents for XE395 ELLIPTICAL SPT0065
Page 7: ...6 ...
Page 27: ...26 Exploded View Diagram ...