7
Fitness
Bike
XBR
95
1. Install the Seat (
61
) on the Seat Carriage (
4
) with four Phillips Head Screws (
98
). Tighten with the Phillips Head
Screw Driver (
114
).
2. Attach the Seat Handle Bar (
6
) to the Seat Carriage (
4
) with the four Hex Head Bolts (
71
), four Flat Washers
(
77
), and four Nyloc Nuts (
89
). Tighten with the wrenches provided (
112
&
130
).
3. Plug the Hand Pulse Sensor Cables (
27
) into the rear two holes on the left side of the rear
plastic cover. Plug the Handlebar resistance cables (
150
) into the remaining front hole.
4. Attach the Front Stabilizer Cover (
32
) and the Rear Stabilizer Cover (
37
) to the Main Frame with four Phillips
Head Screws (
99
). Tighten with the Phillips Head Screw Driver (
114
).
HARDWARE
STEP 3:
Seat & Handle Bar
#98.
M6 x 15mm
Phillips Head Screw
(4 pcs)
#89.
3/8” x 7T
Nyloc Nut
(4 pcs)
#99.
M5 x 12mm
Phillips Head Screw
(4 Pcs)
#77.
3/8” x 19 x 1.5T
Flat Washer
(4 Pcs)
#71.
3/8” x 1-3/4” Hex
Head Bolt
(4 Pcs)
Summary of Contents for XBR95
Page 2: ......
Page 4: ...2 Fitness Bike XBR95 ...
