6
Fitness
Bike
XBR
95
1. Slide the Computer Cable (
44
), Handlebar resistance control cable (
148
), and Hand pulse cable (
133
) through
the bottom of the Console Mast Cover (
31
) and then the bottom of the Console Mast (
2
). Make sure the
Console Mast Cover is correctly oriented (see illustration).
2. Install the Console Mast (
2
) into the receiving tube (make sure not to pinch cables; damage to the electronics
could occur) of the Main Frame (
1
). Insert two Hex Head Bolts (
68
) and two Flat Washers (
76
) on each side.
Insert two Hex Head Bolts and two Curved Washers (
83
) on the front. Tighten all six bolts firmly with the
Wrench (
112
).
3. Remove the white Styrofoam pad (factory installed to prevent bolts from being accidentally dropped into the
console mast tube).
4. Attach the Handle Bar Assembly (
3
) onto the Console Mast (
2
) bracket with the two Hex Head Bolts (
68
),
two Split Washers (
82
), and two Flat Washers (
76
). Completely tighten with the wrench (
112
).
5. Insert the Computer Cable (
44
), Handlebar resistance control cable (
148
), and Hand Pulse Cable (
133
) into
their respective connectors in the back of the Console Assembly (
19
). Attach the
console onto the mounting plate with four Phillips Head Screws (
99
). Tighten with the Phillips Head Screw
Driver (
114
).
HARDWARE
STEP 2:
Console Mast
#82.
8 x 1.5T
Split Washer
(2 pcs)
#83.
5/16” x 19 x 1.5T
Curved Washer
(2 pcs)
#76.
5/16” x 18 x 1.5T
Flat Washer
(6 pcs)
#68.
5/16” x 15mm Hex
Head Bolt
(8 pcs)
#99.
M5 x 12mm
Phillips Head Screw
(4 pcs)
Summary of Contents for XBR95
Page 2: ......
Page 4: ...2 Fitness Bike XBR95 ...
