background image

                                                                                                                                                        XBR25  /  XBR55

33

Effective April 15, 2007

BIKE WARRANTY

Spirit Manufacturing Inc. warrants all its bike parts, for a period of time listed below from the date of retail sale, as determined by sale receipt, or in

the absence of a sales receipt eighteen (18) months from the original factory shipping date, whichever comes first. Spirits responsibilities include

providing new or remanufactured parts, at Spirit s option, and technical support to our independent dealers and servicing organizations. In the

absence of a dealer, or service organization, this warranty will be administered by Spirit directly to a consumer. An extended warranty period

applies to the following components:

Home use

                        XBR25

5

5

R

B

 

 

 

 

 

 

 

 

 

 

 

r

a

e

Y

 

1  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

r

o

b

a

L

r

a

e

Y

 

 1

Frame weldments         Lifetime           Lifetime

All Other Components   5 Years        

Brake                                     Lifetime             Lifetime

NORMAL RESPONSIBILITIES OF THE CONSUMER

This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below:

1. The warranty registration card must be completed and returned to the address listed on the card within 10 days of the original purchase to

validate the manufacturer s limited warranty.

2. Proper use of the bike in accordance with the instructions provided in this manual

3. Proper installation by an authorized Spirit

service company

 in accordance with instructions provided with the bike and with all local electric codes.

4. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose connections or defects in house

wiring.

5. Expenses for making the bike accessible for servicing, including any item that was not part of the bike at the time it was shipped from the factory.

6. Damages to the bike finish during shipping, installation or following installation.

EXCLUSIONS

This warranty does not cover the following:

1. CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES

RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.

Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or

exclusion may not apply to you.

2. Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve malfunction or

defects in workmanship or material, for units that are beyond the warranty period, for units that are beyond the service call

reimbursement period, for bike not requiring component replacement, or bike not in ordinary household use.

3. Damages caused by services performed by persons other than authorized Spirit

service companies;

 use of parts other than original

Spirit parts; or external causes such as alterations, modifications, abuse, misuse, accident, improper maintenance, inadequate power supply, or

acts of God.

4. Products with original serial numbers that have been removed or altered.

5. Products that have been sold, transferred, bartered, or given to a third party.

6. Products that do not have a warranty registration card on file at Spirit Mfg. Spirit reserves the right to request proof of

purchase if no warranty record exists for the product.

7. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.

SERVICE

Keep your bill of sale. Twelve (12) months from the date on the bill of sale or eighteen (18) months from the date of factory

shipping as determined by the serial number establishes the warranty period should service be required. If service is performed,

it is in your best interest to obtain and keep all receipts. This written warranty gives you specific legal rights. You may also have

other rights that vary from state to state. Service under this warranty must be obtained by following these steps, in order:

1. Contact your selling authorized Spirit dealer. OR

2. Contact your local authorized Spirit service organization.

3. If there is a question as to where to obtain service, contact our service department at (870) 935-1107.

4. If no local service is available, Spirit will repair or replace the parts, at Spirit s option, within the warranty period at no charge

for parts. All transportation costs, both to our factory and upon return to the owner, are the responsibility of the owner. The owner is responsible for

adequate packaging upon return to Spirit. Spirit is not responsible for damages in shipping. Make all freight damage claims with the appropriate

freight carrier. DO NOT SHIP ANY UNIT TO OUR FACTORY WITHOUT A RETURN AUTHORIZATION NUMBER. All units arriving without a return

authorization number will be refused.

5. For any further information, or to contact our service department by mail, send your correspondence to:

Spirit Manufacturing, Inc.

P.O. Box 2037

Jonesboro, AR 72402-2037

Product features or specifications as described or illustrated are subject to change without notice. All warranties are made by

Spirit Manufacturing, Inc. This warranty applies only in the 50 states of the U.S.A.

Manufacturer’s Limited Warranty

 Years

10

Summary of Contents for XBR25



































Reviews: