15
OPERATION OF YOUR CONSOLE
GETTING FAMILIAR WITH THE CONTROL PANEL
CONSOLE
GETTING STARTED
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the
power switch located at the front of the treadmill below the motor cover. Ensure that
the safety key is installed, as the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light for a short time.
Then the Time and Distance windows will display Odometer readings for a short
time. The Time window will show how many hours the treadmill has been in use and
the Distance window will show how many miles (or Kilometers if the treadmill is set
to metric readings) the treadmill has gone. Then a message
in
the message center
will show the current software version. The treadmill will then enter idle mode, which
is the starting point for operation.
Summary of Contents for SPT0042
Page 9: ...8...
Page 35: ...34 EXPLODED VIEW DIAGRAM...
