Spirit SPT0042, Owner'S Manual

Page: 21 / 42

20
FUSION PROGRAM
STEP 1: Press the Fusion key. The display will prompt you through the programming.
STEP 2: The Message Center will now be blinking a value, indicating your Age (default is 35). Entering your
correct age affects the heart rate Bar Graph Display and the Heart Rate programs. Use the speed + or - keys to
adjust, then press Enter. Your age determines your recommended maximum heart rate. Since the Bar Graph
Display and the Heart Rate features are based on a percentage of your maximum heart rate, it is important to
enter the correct age for these features to work properly.
STEP 3: The Message Center will now be blinking a value, indicating your Body Weight (default is 70#).
Entering the correct body weight will affect the calorie count. Use the + or - keys to adjust, then press Enter.
A note about the Calorie display: No exercise machine can give you an exact calorie count because there are
too many factors which determine exact calorie burn for a particular person. Even if someone is the exact same
body weight, age and height, their calorie burn may be very different than yours. The Calorie display is to be
used as a reference only to monitor improvement from workout to workout. The calorie count displayed in this
program won’t be accurate because the machine can’t calculate calories expended while strength training
STEP 4: The Message Center will now be blinking the preset top speed of the selected program (3 mph or 3
kmph). Use the speed + or - keys to adjust, then press Enter. Each program has various speed changes
throughout; this allows you to limit the highest speed the program can reach.
STEP 5: The Message Center will be blinking the preset top incline of the selected program (1.0%). Use the
speed + or – keys to adjust, then press Enter.
STEP 6: The Message Center will be blinking the # of intervals desired (default is 10; you may select 10, 20, or
30). Use the speed + or – keys to adjust, then press Enter.
STEP 7: The Message Center will be blinking the desired Interval time (default is 1:00). The time you select will
be the duration of both the cardio & strength intervals. Note: on average you will complete 15-20 repetitions of
the strength exercise in a 0:30 interval. As a general rule, the longer the interval, the less weight (dumbbells)
and speed (treadmill) required; use the + or - keys to adjust, then press Enter.
STEP 8: The Message Center will be blinking the desired recovery time the default setting is 0:30 you desire
after completing both the cardio & strength intervals. Use the + or - keys to adjust, then press Enter
Program Example:
• The user selects 10 intervals (5 cardio and 5 strength) with the following interval durations – length of each
cardio & strength interval is 0:30, recovery interval is 1:00
• Program begins with a 3:00 warm up (1:00 @ 1mph/kmph, 1:00 @ 2mph/kmph, and 1:00 @ 3mph/kmph)
• 1st cardio interval begins, lasting 0:30; console counts down to 0:00 and the Message Center displays
“STRENGTH INTERVAL 1 BEGIN DUMBBELL ROW”
• User steps off of the treadmill to perform the strength exercise. The console counts down to 0:00 and beeps 3x
signaling the user to get back on the treadmill.
• Console displays “PRESS START TO BEGIN RECOVERY”; user walks @ 2mph/kmph for 1:00
• Console then displays 2nd cardio interval and the process proceeds until the user has performed 5 cardio,
strength, and recovery intervals; the 5 strength exercises will be performed sequentially as listed in this manual.
• The last 2:00 are a Cool Down phase with the user walking on the treadmill @ 2 mph/kmph
If 20 intervals was selected, you would perform each strength exercise twice, before moving on to the next
exercise. If 30 intervals is selected, you will perform each exercise once, then repeat the sequence of all 5
exercises a 2nd & 3rd time.
Caution:
Exercises that require dumbbell use - Select a pair of dumbbells that you will be able to safely and effectively
maneuver over the strength interval time you have chosen.